6.30.2009

The Wall Structure, Part Two

Nelson Bench Project India: The Wall Structure, Part Two

Part Two meaning that it is installed and doing what it is meant to be doing: displaying stuff.

To refresh your recollection, it's a 16 foot wide by 2 foot tall slat structure with four slat shelves. It's a Nelson Bench hung on a wall, only it's not a bench. Hopefully that makes sense. It's broken up into four sections, each section being 4x2. Mounting is with some butterfly through-toggles in the drywall. Rather than bother with hitting studs ('cause my finicky stud finder seemed to not find 16" OC), I opted for equally spacing the drilled holes on the slat surface and just going with the toggles.

More on the Nelson Bench Project.

The original post has some SketchUp renderings if you're interested.

The first six pics were taken just after installation.













Although it's not wood, the metal bar structure was also part of the commission. This is a clothing company after all and the intention is to display a few things on the shelves and to hang a ton of clothes on a rack. During planning for this operation, I discovered something called Speed-Rail fittings for the junctions of the bars. With a few twists of an allen key, yous gots yourself some snug neato elbow fittings, T fittings and flange fittings. MUCH easier to manage than dealing with threaded pipe.

And the two pics below are with accessories in place. Throw up a few purses, slather on a bucket of clothes, and you get magic.





All ash construction. Finished with tung oil.

Dimensions of wall structure:
16' wide
2' tall

Dimensions of each shelf:
22" wide
1' deep

Dimensions of clothes rails:
5' lengths (x3) 1" GRC (~1 1/4" nominal)
55" height
16" offset from wall
Speed-Rail fittings

Price: permanent installation, not for sale

If you have a space that needs similar treatment and would like an estimate and some SketchUp renderings, shoot me an email and we'll discuss.

1 comment: